Installation of roller blinds without punching

1. Install roller blind accessories
Determine the left and right direction of the head and the vertical direction of the pull bead. The left and right of the head are interchangeable, and the head can be installed according to the owner's preference or the convenience of home placement. The bead head is rotatable and used for lifting after side loading and top loading respectively.
2. Head installation
There are two ways to install the head on the residential online network, corresponding to two installation schemes. The first is exterior decoration, compare the finished product with the window, and after finding a suitable position, mark the position of the head screws on the window frame or wall, and then use screws to tighten the left and right head screws on the window frame or wall, and place no pull The rotatable module on the head of the bead is opened; the second type of internal installation is to place the finished roller blind in the window frame. After finding a suitable position, mark the position of the head screw on the top of the window frame, and use the screws to connect the left and right roller blinds. The heads are respectively locked on the inner top of the window frame, and the rotatable modules on the head without pull beads are lifted.
3. Installation track
First put the right end of the upper rail into the head with pull beads, then put the left end of the upper rail into the head without pull beads, and buckle the opened rotatable module to confirm that the roller blind will not fall or move easily, then After the installation is completed, the bead curtain on the front side is pulled down slightly, and the roller blind automatically rises, and the bead curtain on the rear side is pulled down to control the descent of the roller blind.