Installation and Maintenance of Curtains
Sep 08, 2023
Leave a message
Step-by-step installation guide
|
First step |
Before drilling, you can first measure the distance between the two sides, make a mark and then punch holes (about 8cm at both ends) |
|
Second step |
Use an electric drill to drill a hole at the installation location, and put the expansion wire into the drilled hole (according to different walls, you can choose a hand electric drill or an impact drill). Generally, a 6cm drill bit is selected. In special cases, please consult customer service. |
|
Third step |
Fix the installation code with a screwdriver (side installation scene display) |
|
The fourth step |
Fix the installation code with a screwdriver (top installation scene display) |
|
The fifth step |
Insert the venetian blind into the card slot (note: please do not install the installation code above the position of the rope reel to prevent the installation code from affecting the lifting) |
|
Step six |
The curtains are installed |
Maintenance tips for longevity
Proper maintenance can help extend the life of your roller curtains and keep them looking their best. Consider the following tips:
- Regular cleaning: Dust and dirt can accumulate on roller curtains over time. Use a vacuum cleaner with a brush attachment or a soft cloth to remove any debris.
- Spot cleaning: In case of stains or spills, address them promptly by gently blotting the affected area with a clean cloth or sponge. Avoid rubbing, as it may spread the stain.
- Avoid excessive force: When operating the roller curtains, handle them gently to prevent any damage to the fabric or mechanism.
- Inspect for damage: Periodically check the roller curtains for any signs of wear or damage, such as frayed edges or loose threads. Address any issues promptly to prevent further deterioration.
- Follow manufacturer's instructions: Always refer to the manufacturer's guidelines for specific care instructions, as different materials and fabrics may require different cleaning methods.